Bee Smokers Compared: Size, Shield, Fuel and What Owners Report After a Season
Disclosure: some store links on this site are affiliate links. If you buy through one, we may earn a commission at no extra cost to you. How we handle affiliate links.
The University of Delaware's beekeeping program calls the smoker your main tool for avoiding stings (MAAREC). A good one stays lit through a whole inspection, puffs cool white smoke and does not burn your fingers. Most smokers look alike, so the differences are in size, the heat shield, the bellows and how easy they are to clean.
Anatomy of a smoker
- Fire chamber (canister). Sized by diameter × height: a 4 × 7 is 4 in across and 7 in tall; a 4 × 10 is 10 in tall.
- Grate. A perforated plate at the bottom that lets air reach the fuel.
- Heat shield. A cage or plate around the canister that keeps your hand and suit off the hot metal.
- Bellows. Leather, suede or vinyl. Pumping it pushes air into the bottom of the chamber.
- Hook. Lets you hang the smoker on the side of a hive box.
4 × 7 or 4 × 10?
| 4 × 7 | 4 × 10 | |
|---|---|---|
| Suits | About 5 to 10 colonies in one yard before refuelling | More than 10 colonies, or several yards |
| Burn time | Shorter | Two to three hours if packed correctly |
| Weight in hand | Lighter | Heavier |
Source: David MacFawn, EAS Master Beekeeper, in Bee Culture. For a first-year keeper with one or two hives, a 4 × 7 with a shield covers the job.
Five smokers compared
| Smoker | Chamber | Body | Shield | Bellows | Weight | Other details | Source |
|---|---|---|---|---|---|---|---|
| Mann Lake 4" × 7" Economy Stainless Steel Smoker with Shield (HD559) | 4 × 7 | Stainless steel | Wire grid | Suede leather | 1.8 lb | Hive hook; replacement bellows not available | Mann Lake |
| Mann Lake Stainless Steel Smoker Pro Bellow 4 × 7 (HD555) | 4 × 7 | Stainless steel, welded bottom | Not listed | Replaceable bellow skin | 2.2 lb | High-temperature valve; bracket set low to keep fingers from heat | Mann Lake |
| Mann Lake Smoke Cloud Smoker with Shield (Z725) | 4 × 7 or 4 × 10 | Stainless steel, perforated grate | Metal shield | Full-size vinyl, intake valve under barrel | 2.6 lb | Two sizes on one page | Mann Lake |
| Dadant 4" × 10" Stainless Steel Smoker with Shield | 4 × 10 | Stainless steel | Shield, with hooks and bottom rests | Not detailed | Not listed | Hinge pins with keepers; American made per retailer | Worker & Hive listing |
| VIVO Large Stainless Steel Beehive Smoker (BEE-V001L) | 4 × 9 | 201 stainless steel | Heat shield with side hook | Not listed | Not listed | Removable perforated fire base; about 12 in tall with nozzle | VIVO |
Specs as published on November 9, 2026. Dadant's own catalog page did not load for us, so its row uses a retailer's listing.
Which details matter most. A shield is worth having on any smoker you hold for long, because, as Texas A&M points out, most suit and glove materials melt or smolder near a hot smoker or flying embers (ENTO-097). Bellows wear out first, so a model with replaceable bellows can outlast one without.
Fuel
| Fuel | How it behaves | Watch out for |
|---|---|---|
| Dry pine needles | Easy to start, white smoke | Resin gums up the smoker over time |
| Untreated burlap or cotton | Smolders well | Must be free of dyes and chemical treatments |
| Plain hardwood pellets | Clean, long-burning | Hard to light alone; can run hot unless topped with loose fuel |
| Wood shavings, dry leaves, cardboard | Quick starters | Burn fast and hot on their own |
| Never use | Petrol, kerosene, lighter fluid, painted or treated wood, synthetic fabric, scented pellets | Hot, black or toxic smoke |
Compiled from MAAREC, Carolina Honeybees (Charlotte Anderson, Master Beekeeper) and Bee Culture.
How to keep it lit
- Put a small handful of loose, quick-burning starter in the bottom and light it from below.
- Pump the bellows until it burns well, then push it down and add more fuel in small handfuls, letting each catch before the next.
- Finish with a loose layer of slower fuel on top. Smoldering fuel on top is what gives cool smoke.
- Give one or two puffs at the entrance and over the frames. Over-smoking agitates bees.
Lighting from the top, packing too tightly too soon and forgetting to pump are the usual reasons a smoker dies, according to Honey Bee Suite's lighting guide (Honey Bee Suite).
What experienced keepers report after a season
Recurring themes, summarized in our own words:
- Gunk builds up. Resinous fuels such as pine needles leave creosote inside the chamber and lid. Anderson suggests cleaning the smoker every spring; MacFawn burns the deposits off with a torch and scrapes them out with a hive tool.
- Cork it, don't dump it. Plugging the nozzle with a cork or rag puts the fire out, saves coals for next time and reduces creosote (MacFawn). MAAREC warns that dumping hot coals has started many brush fires.
- Keep it in a metal box for the car and between yards (MacFawn).
- Clear the grate. Turning the smoker upside down and pumping the bellows clears ash from under the grate (MacFawn).
- A smoker that sits needs a few puffs to get going again after a couple of minutes (MacFawn).
Safety
Smokers start fires. Light and use them on bare ground away from dry grass, keep them away from your suit and gloves, never use accelerants, and put them out completely in a closed metal container. Check local fire rules in dry seasons.
Sources
- David MacFawn, "Smokers", Bee Culture
- Charlotte Anderson, "Bee Smoker Fuel", Carolina Honeybees
- Rusty Burlew, "How to light a smoker so it stays lit", Honey Bee Suite
- University of Delaware MAAREC, Handling Bees
- Texas A&M AgriLife Extension, ENTO-097
- Product pages linked in the table (read November 9, 2026)
Back to the start: Beginner beehive kits compared